China Railways SL3
The China Railways SL3 (勝利3, Shènglì, "victory") class steam locomotive was a class of 4-6-2 passenger steam locomotives operated by the China Railway. They were originally built for the South Manchuria Railway, the Manchukuo National Railway and the North China Transportation Company by several Japanese manufacturers between 1934 and 1940. They were designed in 1933 based on the design of the first Pashisa class locomotives (later reclassified Pashishi class); the first order was placed by Mantetsu in March of that year.[1]
History
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/be/Mnr-pashishi5845_%28pashisa516%29.png/220px-Mnr-pashishi5845_%28pashisa516%29.png)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/85/Northchinatpt-pashisa1523.png/220px-Northchinatpt-pashisa1523.png)
After the Chosen Government Railway Bureau entrusted the management of the North Chosen Line between Cheongjin and Unggi in Korea to the South Manchuria Railway (Mantetsu), Mantetsu ordered sixteen of these locomotives, which were built in 1934 and 1935 by Hitachi and Kisha Seizō of Japan.[1] These were designated Pashisa (パシサ) class, after the previous class of locomotives with that designation were reclassified Pashiha class in 1933. Care was taken during the design process to maximise the commonality of parts between these engines and those of the MNR Mikaro, Mantetsu Mikasa and Mantetsu Mikaro class freight locomotives.[1]
The Mantetsu Pashisa class was identical to the Manchukuo National's Pashishi (パシシ) class, which were built to use lignite fuel. The first ten of these were built by Hitachi in 1934, these were called the "National Small Pashi" (國小パシ).[1] After the acquisition of the Chinese Eastern Railway in March 1935 and the conversion of its mainline from Harbin to Xinjing from 1,520 mm (4 ft 11+27⁄32 in) Russian gauge to standard gauge, they were used to pull express trains, including the Asia Express, on that section. At the end of 1935, when the emperor of Manchukuo, Puyi, visited Harbin for the first time, his train was hauled by one of these locomotives.
The firegrate on the MNR Pashishis proved to be too small and so were increased by 0.5 m2 (5.4 sq ft), and at the same time, the firebox area was also enlarged by 0.4 m2 (4.3 sq ft). This new design, dubbed "New National Small Pashi" (新國小パシ), were 2.60 t (2.56 long tons; 2.87 short tons) heavier than the National Small Pashi, and twenty were built for the Manchukuo National in 1936 by Hitachi and Kisha Seizō.[1]
In the unified classification scheme of 1938, the Mantetsu Pashisa and Manchukuo National Pashishi classes were combined as the Pashisa class.[1]
Twenty were built by Hitachi in 1939 for North China Transport, numbered 1501 through 1520, followed by another 30 in 1939–1940 from Kisha Seizō, numbered 1521 through 1550.
Owner | Class & numbers (1934–1938) | Class & numbers (1938–1945) | Builder | Years Built | Notes |
---|---|---|---|---|---|
Mantetsu | パシサ860–パシニ875 | パシサ1–パシサ16 | Hitachi, Kisha Seizō | 1934–1935 | North Chosen Line |
Manchukuo National | パシシ5830–パシシ5834 | パシサ501–パシサ505 | Kisha Seizō | 1934 | "National Small Pashi" (國小パシ) |
Manchukuo National | パシシ5835–パシシ5839 | パシサ506–パシサ510 | Hitachi | 1934 | "National Small Pashi" (國小パシ) |
Manchukuo National | パシシ5840–パシシ5842 | パシサ511–パシサ513 | Kisha Seizō | 1936 | "New National Small Pashi" (新國小パシ) |
Manchukuo National | パシシ5843–パシシ5844 | パシサ514–パシサ515 | Hitachi | 1936 | "New National Small Pashi" (新國小パシ) |
Manchukuo National | パシシ5845–パシシ5849 | パシサ516–パシサ520 | Kisha Seizō | 1936 | "New National Small Pashi" (新國小パシ) |
Manchukuo National | パシシ5850–パシシ5859 | パシサ521–パシサ530 | Hitachi | 1936 | "New National Small Pashi" (新國小パシ) |
North China | - | パシサ1501–パシサ1520 | Hitachi | 1939 | "New National Small Pashi" (新國小パシ) |
North China | - | パシサ1521–パシサ1550 | Kisha Seizō | 1939–1940 | "New National Small Pashi" (新國小パシ) |
Postwar
China Railways SL3 (勝利3)
The thirty Pashisa-class locomotives belonging to the Manchukuo National were assigned to the Fengtian (1), the Jilin (5), the Mudanjiang (7), and the Qiqihar Railway Bureaus (11), and six were out on loan to other railways. These, along with the thirty belonging to North China Transport, were taken over by the Republic of China Railway. In 1951, they were classified class ㄆㄒ三 (PX3) by the China Railway, becoming class SL3 (勝利, Shènglì, "victory") in 1959; they were initially numbered in the 101–270 range (other sources say 101–188). In 1980, twelve locomotives with numbers ranging from 114 to 264 were seen in service around China, including in Shanghai, Beijing, Zhengzhou and Guangzhou. SL3 152 is preserved at the China Railway Museum in Beijing.
Korean State Railway 바시서 (Pasisŏ) class
At the end of the Pacific War, all of Mantetsu's Pashisa-class locomotives were in northern Korea: eleven were assigned to the Rajin Railway Burea for operations on Mantetsu's North Chosen Line, whilst the remaining five were out on loan to the Chosen Government Railway (Sentetsu). These were taken over by the Korean State Railway in North Korea, where they were designated 바시서 (Pasisŏ) class (not to be confused with the Pashisa-class inherited from Sentetsu). Little is known about their service lives in North Korea, but they were likely retired by the late 1960s.
Class Specifications
Pashisa (Mantetsu) | Pashisa (MNR Small Pashi) | Pashisa (New MNR Small Pashi) | |
---|---|---|---|
Builder | Hitachi, Kisha Seizō | Hitachi | Hitachi, Kisha Seizō |
Build date | 1934–1935 | 1934 | 1936–1940 |
Driver diameter | 1,750 mm (69 in) | 1,750 mm (69 in) | 1,750 mm (69 in) |
Length | 21,498 mm (846.4 in) | 21,498 mm (846.4 in) | 21,498 mm (846.4 in) |
Width | 2,995 mm (117.9 in) | 2,995 mm (117.9 in) | 2,995 mm (117.9 in) |
Height | 4,434 mm (174.6 in) | 4,434 mm (174.6 in) | 4,434 mm (174.6 in) |
Loco weight | 89.40 t (87.99 long tons; 98.55 short tons) | 91.10 t (89.66 long tons; 100.42 short tons) | 91.00 t (89.56 long tons; 100.31 short tons) |
Tender weight | 58.48 t (57.56 long tons; 64.46 short tons) | 57.52 t (56.61 long tons; 63.40 short tons) | 58.48 t (57.56 long tons; 64.46 short tons) |
Adhesive weight | 55.60 t (54.72 long tons; 61.29 short tons) | 57.70 t (56.79 long tons; 63.60 short tons) | 56.00 t (55.12 long tons; 61.73 short tons) |
Valve gear | Walschaerts | Walschaerts | Walschaerts |
Tractive effort | 123.7 kN (27,800 lbf) | 123.7 kN (27,800 lbf) | 123.7 kN (27,800 lbf) |
Cylinder size | 533 mm × 660 mm (21.0 in × 26.0 in) | 533 mm × 660 mm (21.0 in × 26.0 in) | 533 mm × 660 mm (21.0 in × 26.0 in) |
Boiler pressure | 14.0 kgf/cm2 (199 psi) | 14.0 kgf/cm2 (199 psi) | 14.0 kgf/cm2 (199 psi) |
Firegrate area | 4.07 m2 (43.8 sq ft) | 4.07 m2 (43.8 sq ft) | 4.57 m2 (49.2 sq ft) |
Heating surface | 220.60 m2 (2,374.5 sq ft) | 220.60 m2 (2,374.5 sq ft) | 221.00 m2 (2,378.8 sq ft) |
Superheater area | 44.60 m2 (480.1 sq ft) | 44.60 m2 (480.1 sq ft) | 44.60 m2 (480.1 sq ft) |
Tube area | 156.10 m2 (1,680.2 sq ft) | 156.10 m2 (1,680.2 sq ft) | 156.10 m2 (1,680.2 sq ft) |
Firebox area | 19.90 m2 (214.2 sq ft) | 19.90 m2 (214.2 sq ft) | 20.30 m2 (218.5 sq ft) |
Small tubes (Number x diameter) | 131 x 51 mm (2.0 in) | 131 x 51 mm (2.0 in) | 131 x 51 mm (2.0 in) |
Large tubes (Number x diameter) | 26 x 137 mm (5.4 in) | 26 x 137 mm (5.4 in) | 26 x 137 mm (5.4 in) |
Water capacity | 24.00 m3 (848 cu ft) | 24.00 m3 (848 cu ft) | 24.00 m3 (848 cu ft) |
Fuel capacity | 9.60 t (9.45 long tons; 10.58 short tons) | 9.60 t (9.45 long tons; 10.58 short tons) | 9.60 t (9.45 long tons; 10.58 short tons) |
Operator | South Manchuria Railway Korean State Railway | Manchukuo National Railway China Railway | Manchukuo National Railway North China Transport China Railway |
Numbers in class | 16 | 10 | 70 |
[1]
References
- ^ a b c d e f g Ichihara, Yoshizumi, 写真集南満洲鉄道 (South Manchuria Railway Photo Collection) pp. 117-118, 138, 1998 Seibundo Shinkosha Publishing Co. Ltd. (in Japanese)
- v
- t
- e
Standard gauge | |
---|---|
Narrow gauge |
trainsets
Inspection |
|
---|---|
Passenger |
|