68–95–99.7 rule
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/22/Empirical_rule_histogram.svg/330px-Empirical_rule_histogram.svg.png)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/1e/Standard_score_and_prediction_interval.svg/260px-Standard_score_and_prediction_interval.svg.png)
In statistics, the 68–95–99.7 rule, also known as the empirical rule, and sometimes abbreviated 3sr, is a shorthand used to remember the percentage of values that lie within an interval estimate in a normal distribution: approximately 68%, 95%, and 99.7% of the values lie within one, two, and three standard deviations of the mean, respectively.
In mathematical notation, these facts can be expressed as follows, where Pr() is the probability function,[1] Χ is an observation from a normally distributed random variable, μ (mu) is the mean of the distribution, and σ (sigma) is its standard deviation:
The usefulness of this heuristic especially depends on the question under consideration.
In the empirical sciences, the so-called three-sigma rule of thumb (or 3σ rule) expresses a conventional heuristic that nearly all values are taken to lie within three standard deviations of the mean, and thus it is empirically useful to treat 99.7% probability as near certainty.[2]
In the social sciences, a result may be considered "significant" if its confidence level is of the order of a two-sigma effect (95%), while in particle physics, there is a convention of a five-sigma effect (99.99994% confidence) being required to qualify as a discovery.
A weaker three-sigma rule can be derived from Chebyshev's inequality, stating that even for non-normally distributed variables, at least 88.8% of cases should fall within properly calculated three-sigma intervals. For unimodal distributions, the probability of being within the interval is at least 95% by the Vysochanskij–Petunin inequality. There may be certain assumptions for a distribution that force this probability to be at least 98%.[3]
Proof
We have that doing the change of variable in terms of the standard score , we have
and this integral is independent of and . We only need to calculate each integral for the cases .
Cumulative distribution function
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/2b/Cumulative_distribution_function_for_normal_distribution%2C_mean_0_and_sd_1.png/270px-Cumulative_distribution_function_for_normal_distribution%2C_mean_0_and_sd_1.png)
These numerical values "68%, 95%, 99.7%" come from the cumulative distribution function of the normal distribution.
The prediction interval for any standard score z corresponds numerically to (1 − (1 − Φμ,σ2(z)) · 2).
For example, Φ(2) ≈ 0.9772, or Pr(X ≤ μ + 2σ) ≈ 0.9772, corresponding to a prediction interval of (1 − (1 − 0.97725)·2) = 0.9545 = 95.45%. This is not a symmetrical interval – this is merely the probability that an observation is less than μ + 2σ. To compute the probability that an observation is within two standard deviations of the mean (small differences due to rounding):
This is related to confidence interval as used in statistics: is approximately a 95% confidence interval when is the average of a sample of size .
Normality tests
The "68–95–99.7 rule" is often used to quickly get a rough probability estimate of something, given its standard deviation, if the population is assumed to be normal. It is also used as a simple test for outliers if the population is assumed normal, and as a normality test if the population is potentially not normal.
To pass from a sample to a number of standard deviations, one first computes the deviation, either the error or residual depending on whether one knows the population mean or only estimates it. The next step is standardizing (dividing by the population standard deviation), if the population parameters are known, or studentizing (dividing by an estimate of the standard deviation), if the parameters are unknown and only estimated.
To use as a test for outliers or a normality test, one computes the size of deviations in terms of standard deviations, and compares this to expected frequency. Given a sample set, one can compute the studentized residuals and compare these to the expected frequency: points that fall more than 3 standard deviations from the norm are likely outliers (unless the sample size is significantly large, by which point one expects a sample this extreme), and if there are many points more than 3 standard deviations from the norm, one likely has reason to question the assumed normality of the distribution. This holds ever more strongly for moves of 4 or more standard deviations.
One can compute more precisely, approximating the number of extreme moves of a given magnitude or greater by a Poisson distribution, but simply, if one has multiple 4 standard deviation moves in a sample of size 1,000, one has strong reason to consider these outliers or question the assumed normality of the distribution.
For example, a 6σ event corresponds to a chance of about two parts per billion. For illustration, if events are taken to occur daily, this would correspond to an event expected every 1.4 million years. This gives a simple normality test: if one witnesses a 6σ in daily data and significantly fewer than 1 million years have passed, then a normal distribution most likely does not provide a good model for the magnitude or frequency of large deviations in this respect.
In The Black Swan, Nassim Nicholas Taleb gives the example of risk models according to which the Black Monday crash would correspond to a 36-σ event: the occurrence of such an event should instantly suggest that the model is flawed, i.e. that the process under consideration is not satisfactorily modeled by a normal distribution. Refined models should then be considered, e.g. by the introduction of stochastic volatility. In such discussions it is important to be aware of the problem of the gambler's fallacy, which states that a single observation of a rare event does not contradict that the event is in fact rare. It is the observation of a plurality of purportedly rare events that increasingly undermines the hypothesis that they are rare, i.e. the validity of the assumed model. A proper modelling of this process of gradual loss of confidence in a hypothesis would involve the designation of prior probability not just to the hypothesis itself but to all possible alternative hypotheses. For this reason, statistical hypothesis testing works not so much by confirming a hypothesis considered to be likely, but by refuting hypotheses considered unlikely.
Table of numerical values
Because of the exponentially decreasing tails of the normal distribution, odds of higher deviations decrease very quickly. From the rules for normally distributed data for a daily event:
Range | Expected fraction of population inside range | Expected fraction of population outside range | Approx. expected frequency outside range | Approx. frequency outside range for daily event | |
---|---|---|---|---|---|
μ ± 0.5σ | 0.382924922548026 | 6.171E-01 = 61.71 % | 3 in | 5 | Four or five times a week |
μ ± σ | 0.682689492137086[4] | 3.173E-01 = 31.73 % | 1 in | 3 | Twice or thrice a week |
μ ± 1.5σ | 0.866385597462284 | 1.336E-01 = 13.36 % | 2 in | 15 | Weekly |
μ ± 2σ | 0.954499736103642[5] | 4.550E-02 = 4.550 % | 1 in | 22 | Every three weeks |
μ ± 2.5σ | 0.987580669348448 | 1.242E-02 = 1.242 % | 1 in | 81 | Quarterly |
μ ± 3σ | 0.997300203936740[6] | 2.700E-03 = 0.270 % = 2.700 ‰ | 1 in | 370 | Yearly |
μ ± 3.5σ | 0.999534741841929 | 4.653E-04 = 0.04653 % = 465.3 ppm | 1 in | 2149 | Every 6 years |
μ ± 4σ | 0.999936657516334 | 6.334E-05 = 63.34 ppm | 1 in | 15787 | Every 43 years (twice in a lifetime) |
μ ± 4.5σ | 0.999993204653751 | 6.795E-06 = 6.795 ppm | 1 in | 147160 | Every 403 years (once in the modern era) |
μ ± 5σ | 0.999999426696856 | 5.733E-07 = 0.5733 ppm = 573.3 ppb | 1 in | 1744278 | Every 4776 years (once in recorded history) |
μ ± 5.5σ | 0.999999962020875 | 3.798E-08 = 37.98 ppb | 1 in | 26330254 | Every 72090 years (thrice in history of modern humankind) |
μ ± 6σ | 0.999999998026825 | 1.973E-09 = 1.973 ppb | 1 in | 506797346 | Every 1.38 million years (twice in history of humankind) |
μ ± 6.5σ | 0.999999999919680 | 8.032E-11 = 0.08032 ppb = 80.32 ppt | 1 in | 12450197393 | Every 34 million years (twice since the extinction of dinosaurs) |
μ ± 7σ | 0.999999999997440 | 2.560E-12 = 2.560 ppt | 1 in | 390682215445 | Every 1.07 billion years (four occurrences in history of Earth) |
μ ± 7.5σ | 0.999999999999936 | 6.382E-14 = 63.82 ppq | 1 in | 15669601204101 | Once every 43 billion years (never in the history of the Universe, twice in the future of the Local Group before its merger) |
μ ± 8σ | 0.999999999999999 | 1.244E-15 = 1.244 ppq | 1 in | 803734397655348 | Once every 2.2 trillion years (never in the history of the Universe, once during the life of a red dwarf) |
μ ± xσ | 1 in | Every days |
See also
- p-value
- Six Sigma § Sigma levels
- Standard score
- t-statistic
References
- ^ Huber, Franz (2018). A Logical Introduction to Probability and Induction. New York: Oxford University Press. p. 80. ISBN 9780190845414.
- ^ This usage of "three-sigma rule" entered common usage in the 2000s, e.g. cited in
- Schaum's Outline of Business Statistics. McGraw Hill Professional. 2003. p. 359. ISBN 9780071398763
- Grafarend, Erik W. (2006). Linear and Nonlinear Models: Fixed Effects, Random Effects, and Mixed Models. Walter de Gruyter. p. 553. ISBN 9783110162165.
- ^ See:
- Wheeler, D. J.; Chambers, D. S. (1992). Understanding Statistical Process Control. SPC Press. ISBN 9780945320135.
- Czitrom, Veronica; Spagon, Patrick D. (1997). Statistical Case Studies for Industrial Process Improvement. SIAM. p. 342. ISBN 9780898713947.
- Pukelsheim, F. (1994). "The Three Sigma Rule". American Statistician. 48 (2): 88–91. doi:10.2307/2684253. JSTOR 2684253.
- ^ Sloane, N. J. A. (ed.). "Sequence A178647". The On-Line Encyclopedia of Integer Sequences. OEIS Foundation.
- ^ Sloane, N. J. A. (ed.). "Sequence A110894". The On-Line Encyclopedia of Integer Sequences. OEIS Foundation.
- ^ Sloane, N. J. A. (ed.). "Sequence A270712". The On-Line Encyclopedia of Integer Sequences. OEIS Foundation.
External links
- "Calculate percentage proportion within x sigmas at WolframAlpha
- v
- t
- e
univariate
with finite support | |
---|---|
with infinite support |
univariate
univariate
continuous- discrete |
---|
(joint)
- Discrete:
- Ewens
- multinomial
- Continuous:
- Dirichlet
- multivariate Laplace
- multivariate normal
- multivariate stable
- multivariate t
- normal-gamma
- Matrix-valued:
- LKJ
- matrix normal
- matrix t
- matrix gamma
- Wishart
- Univariate (circular) directional
- Circular uniform
- univariate von Mises
- wrapped normal
- wrapped Cauchy
- wrapped exponential
- wrapped asymmetric Laplace
- wrapped Lévy
- Bivariate (spherical)
- Kent
- Bivariate (toroidal)
- bivariate von Mises
- Multivariate
- von Mises–Fisher
- Bingham
and singular
- Degenerate
- Dirac delta function
- Singular
- Cantor
Category
Commons