Speed Dependent Damping Control
Speed Dependent Damping Control (also called SD²C) was an automatic damper system installed on late-1980s and early-1990s Cadillac automobiles. This system firmed up the suspension at 25 mph (40 km/h) and again at 60 mph (97 km/h). The firmest setting was also used when starting from a standstill until 5 mph (8 km/h).
Applications:
- 1989–1992 Cadillac Allanté
Computer Command Ride
The semi-active suspension system was updated as Computer Command Ride in 1991. This new system included acceleration, braking rates, and lateral acceleration to the existing vehicle speed metric.
- 1991– Cadillac Fleetwood
- 1991– Cadillac Eldorado
- 1991– Cadillac Seville
- 1991– Cadillac De Ville (optional, standard for 1993)
- 1992– Oldsmobile Achieva SCX W41
References
- Daniel Charles Ross. "Cadillac Allanté". Motor Trend (February 1989): 88–93.
- Robert J. Reuter (1989-02-01). "Speed Dependent Damping for the 1989 Cadillac Allante". SAE Technical Paper Series. Vol. 1. doi:10.4271/890178. SAE Technical Paper 890178.
- v
- t
- e
Powertrain
Part of the Automobile series
- Diesel engine
- Electric
- Fuel cell
- Hybrid (Plug-in hybrid)
- Internal combustion engine
- Petrol engine
- Steam engine
- Automatic transmission
- Chain drive
- Direct-drive
- Clutch
- Constant-velocity joint
- Continuously variable transmission
- Coupling
- Differential
- Direct-shift gearbox
- Drive shaft
- Dual-clutch transmission
- Drive wheel
- Automated manual transmission
- Electrorheological clutch
- Epicyclic gearing
- Fluid coupling
- Friction drive
- Gearshift
- Giubo
- Hotchkiss drive
- Limited-slip differential
- Locking differential
- Manual transmission
- Manumatic
- Parking pawl
- Park-by-wire
- Preselector gearbox
- Semi-automatic transmission
- Shift-by-wire
- Torque converter
- Transaxle
- Transfer box
- Transmission control unit
- Universal joint
Portal
Category