Cubitt (car)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/5f/Cubitt_Car_Factory_c.1922_at_Great_Southern_Works%2C_Aylesbury.jpg/220px-Cubitt_Car_Factory_c.1922_at_Great_Southern_Works%2C_Aylesbury.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/28/Cubitts_Engineering_Comp._1924.jpg/220px-Cubitts_Engineering_Comp._1924.jpg)
Cubitt was a British motor vehicle manufactured in Aylesbury, Buckinghamshire from 1920 to 1925. Around 3,000 vehicles were built.
History
The Cubitts Engineering Co. Ltd. was originally a construction company which built much of Central London - Covent Garden Market, the Cenotaph and the 'new' east wing of Buckingham Palace. It had been founded by Thomas Cubitt around 1815, in association with his brothers William and Lewis. In 1883 the business was acquired by Holland & Hannen, a leading competitor, and became known as Holland & Hannen and Cubitts and subsequently as Holland, Hannen & Cubitts.[1]
In 1920 they began manufacturing motor vehicles at the Great Southern Works on the Bicester Road in Aylesbury under the name Cubitt, completing circa 3,000 motor vehicles between 1920 and 1925. Cubitt employed mass production techniques to compete with the flood of American imports, and they openly stated that it was an American type car, simple and rugged. Manufacturing difficulties, primarily with component suppliers, prevented both the 5,000 per year target and the low target price.[2]
In 1922 S.F. Edge (director of Napier cars; director of British Anzani; and managing director of AC Cars) bought the company and also became managing director. He employed J.S. Napier (of Arrol-Johnston not of Napier Cars) as both director and designer, who went on to introduce the reduced weight side-valve version of the engine for the K4 and L4 models.[3][2]
In January 1925 (or 1924[2]) Edge decided that AC Cars would manufacture their own version of the Anzani engine at the Aylesbury works and thus cancelled the order for 30 engines a month from Anzani - this engine production probably only continued until c.1927.[2][4]
In February 1925 a receiver was appointed, Cubitt was declared bankrupt and third party investors, such as James Putman of Farringdon, lost a lot of money.[5][2][6]
After the demise of Cubitt motor manufacturing in 1925 and the A.C. Cars engine manufacture circa 1927, the Great Southern Works was involved in other piecemeal projects including making shop-fittings until it was demolished and redeveloped for domestic housing in the 21st century. The marque is commemorated by 'Cubitt Street' (and Edge Street) which traverse the old works.
Models
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/1b/Cubitt_advert_circa_1921.jpg/220px-Cubitt_advert_circa_1921.jpg)
The 16/20 used 2.8 litre, 4 cylinder engines with coil ignition, plus a four speed gearbox with a central gear lever. Unusually the final drive was by a worm gear arrangement. It was a family car that could achieve 50 mph for £442, and was considered good value by contemporary motoring magazines. The body cost £20 to build and the car was described as high and heavy, although it was also possible to have a body fitted by a different company. The slogans were Big value for little money and The right car at the right price.[2][7]
In 1925 the K4 and L4 models were introduced featuring a new engine of the same capacity, but lightened and simplified by conversion to side valves instead of overhead valves, use of aluminium pistons and lighter connecting rods. The side-valve engine may have been for streamlined production, cost, reliability or weight-saving reasons. The cantilever rear springs were replaced with semi-elliptic springs and the rear axle was fitted with an underslung worm drive. The K4 used a 3 metre wheelbase and the L4 was approximately a foot longer.[2][7][6][8]
Model | Available | Cylinders | Capacity | Wheelbase |
---|---|---|---|---|
16/20 hp | 1923–1925 | 4 In line, Overhead valves | 2815 cm³ | 3048–3200 mm |
K4 | 1925 | 4 In line, side valves | 2815 cm³ | 3073 mm |
L4 | 1925 | 4 In line, side valves | 2815 cm³ | 3226 mm |
See also
- Automotive industry in the United Kingdom
- Timeline of motor vehicle brands
- List of car manufacturers of the United Kingdom
References
- ^ Cubitts 1810 - 1975, published 1975
- ^ a b c d e f g Nick Georgano: The Beaulieu Encyclopedia of the Automobile, Volume 1 A–F. Fitzroy Dearborn Publishers, Chicago 2001, ISBN 1-57958-293-1
- ^ Double de clutch. Image and profile of Cubitt www.doubledeclutch.com, accessed 15 October 2021
- ^ "British Anzani History". Archived from the original on 4 March 2016. Retrieved 26 July 2014.
- ^ "The Bucks Herald, Cubitt, pride of Aylesbury, rolled out one more time as Kop Hill Climb looms". Archived from the original on 27 July 2014. Retrieved 24 July 2014.
- ^ a b Farringdon - East Devon, The Putnams of Farringdon House www.fra.btck.co.uk, accessed 15 October 2021
- ^ a b Old Classic Cars - Cubitt 16/20hp tourer. www.oldclassiccar.co.uk, accessed 15 October 2021
- ^ David Culshaw & Peter Horrobin: The Complete Catalogue of British Cars 1895–1975. Veloce Publishing plc. Dorchester (1999). ISBN 1-874105-93-6
Other sources
- David Culshaw & Peter Horrobin: The Complete Catalogue of British Cars 1895–1975. Veloce Publishing plc. Dorchester (1999). ISBN 1-874105-93-6
External links
- Old Classic Cars - Pictures of Cubitt 16/20hp tourer.
- Double de clutch. Image and profile of Cubitt
- Christies Auction, C.1926 Cubitt 15.9HP Two seater with Dickey
- Cunningham Classic Cars, 1925 Cubitt K4
51°49′18″N 0°49′21″W / 51.821697°N 0.822607°W / 51.821697; -0.822607